Porcelain Sink Refinishing – Installing your new bar sink can be fairly simple, or very elaborate. It all has to do with the kind of sink you buy. If you opted to bring a drop in kind sink, provided that you already have the right sized hole in the counter top, the installation is pretty simple. If you have decided on an undermount sink, then installation can be a whole lot trickier.
This sort of sink includes a flange, or lip, which runs all the way round the sink and also sits along with the counter top. In fact, if the hole is sort of ragged, nobody will ever understand so long as you use a top mounted sink. The sink is then secured from below the counter top with screws and little plates which hold the sink in place.
Another way to guarantee the sink is to use epoxy. A bead of epoxy is placed around the beneath the sink’s lip. Dip the sink in the hole and make certain you’ve got a flush seam all the way round. If a part of the sink is not flush, use the brackets under the counter to pull it down and secure it. If you do have a flush seam, then it means you’ve got a very smooth and level counter surface. If this is the case, you can use only epoxy to mount the sink and may not need any screws and brackets underneath. In either case, make certain to allow the epoxy to dry for the amount of time displayed on the packaging. Don’t touch the sink whatsoever during this period.
In the instance of an undermount bar sink, the job is definitely more complicated. In fact, in most cases you might want to have a professional set up your undermount sink. Should you by chance have a pit prepared in your counter matching the specifications of your sink, then you can try the job yourself. The actual mounting of the sink is not the hard part. The challenging part is usually finishing and making the sink hole. Considering that the sink mounts under the cabinet, there is no flange showing on the countertops. This means the counter top has to have a rounded and finished border top down to the sink. This is where you are very likely to desire a specialist.
Should you happen to already have a prepared hole for your undermount bar sink, then you can install the sink yourself as long as you are a small handy. When replacing your counter top along with incorporating a sink, the ideal way to install the sink is to do it before the counter top is set up. Following the sink has dried you can then set up the counter with the sink already attached.
You’ll need to epoxy the sink and then clamp it in position so the epoxy can dry. The most important part of the practice is to let the epoxy dry at least as long as the manufacturer recommends. You can’t go wrong by allowing the epoxy dry for a longer period of time, but you’ll get in trouble if you do not let the epoxy set for the at least the proper quantity of time. The result can be a sink which feels secure, but fails beneath the load of dishes and water.
Should you handle the sink installation process properly, you’ll have accomplished a few things. To begin with, you’ll have saved money by installing your pub sink yourself. Secondly, if your guests decorate your pub sink area, you’ll have the pride of knowing, and bragging, which you did it yourself!